How to Attach Bells to a Spin Drum | Musical Instruments


This is part two of how to make a spin drum. Now that we have our spin drum made with the
holes in it and the dowel, we are going to get some yarn and we’re going to cut the yarn
about the length of the dowel. Then, we’re going to thread through holes
that we put and we’re going to wrap it around the dowel like so. I’m going to do it securely. It’s going to wrap around, pull it tight,
and you’re going to pull it through the other hole. Once it’s through
the hole, we are going to get some jingle bells and we are going to attach the jingle
bells. We’re going to take the yarn, and we’re going
to slide the jingle bells through the yarn and tie it on each side. Once you have both the jingle bells on both
sides of the yarn, then you can tie them and then this is what is sounds like. What you’re going to have to do is take the
caps of the Pringles container, the plastic caps, and on both sides secure them. It’s going to sound like this. Now, we have a spin drum.